Blue Removal
Terex DEF Delete Emulator for DC9 DC13 DC16 Tier 4 Engines

Scania DEF Delete Emulator

£ 1,070.00

- Including DHL Shipping

*
Category:
  • Satisfaction Guaranteed
  • No Hassle Refunds
  • Secure Payments

Scania DEF Delete Emulator – DC9 / DC13 / DC16 Tier 4i & Tier 4 Final Engines

Scania DEF Delete Emulator for DC9 DC13 DC16 Tier 4 Engines

Our Scania DEF Delete Emulator is a direct plug-and-play module designed for Scania DC9, DC13, and DC16 engines used in construction, quarrying, and industrial equipment. It completely removes the need for Diesel Exhaust Fluid (DEF) and disables the entire AdBlue / SCR system electronically — restoring full engine performance without derate or limp mode.

Compatible Engine Models

  • Scania DC9 – 9.3L Tier 4 Interim & Final
  • Scania DC13 – 12.7L Tier 4 Interim & Final
  • Scania DC16 – 16.4L Tier 4 Interim & Final

This emulator supports both Tier 4 Interim and Tier 4 Final Scania engines, automatically detecting and communicating with the ECU through the CAN network.

Caterpillar and OEM Machine Model Compatibility Matrix
While this module targets Scania DC9, DC13, and DC16 Tier 4i and Tier 4 Final engines, these industrial powerpacks are widely utilized across major heavy machinery brands in the US and Canada. Our plug-and-play emulator is fully compatible with the following specific equipment models:
  • Terex & Powerscreen Crushers / Screeners: Premiertrak 400X, R400X, Trakpactor 320, Maxtrak 1300, and Chieftain 2200.
  • Doosan / Develon Excavators & Loaders: DX350LC-5, DX420LC-5, DX490LC-5, DX530LC-5, DL420-5, and DL550-5.
  • Hyundai Wheel Loaders & Material Handlers: HL970, HL975, HL980, HW250MH, and 110D-9.
  • Morbark Industrial Wood Chippers: 3200, 3400X, 50/48X, and 6400X Wood Hog series.
  • JCB & Bell Equipment: Heavy earthmoving artics and specialized industrial powerpacks utilizing Scania Tier 4 Final platforms.
Bypassed Scania Fault Codes & SCR Components
Our CAN Bus 250 kbps module does not just clear active dashboard warnings—it replaces the digital signature of the entire emissions architecture on the network. It permanently clears and suppresses fault codes related to:
  • EEC (Emission Electronic Control) Faults and communication timeouts.
  • SCR Malfunctions resulting in active derate or 1-hour shutdown countdowns.
  • NOx Sensor Communication Loss (Upstream and Downstream).
  • DEF Pump Heating Elements, internal pressure sensor failures, and tank level/quality sensors.
🔧 Scania Industrial Engine DEF Troubleshooting FAQ
Does this emulator work if my Scania SCR control module is completely water-damaged or dead?
 
Yes. Because our emulator completely takes over network communications on the 4-wire CAN Bus line (24V+, GND, CAN-H, CAN-L), it simulates a perfectly healthy DEF system independently. It replaces the digital feedback of the factory DEF pump, tank level sensors, and NOx sensors entirely. Even if your original SCR control module is physically destroyed or non-functional, our plug-and-play module will restore full power and bypass limp mode.
 
Will this permanently clear the active countdown timer / engine derate on my Terex or Doosan machine?

Yes. Once the factory DEF control module is disconnected and our emulator is plugged directly inline, it instantly sends the correct operational data packets across the CAN network to the main engine ECU. It overrides the active limp mode countdown restriction immediately upon turning the key, returning your machine to 100% full power without any laptop remapping.
Is this system compatible with North American EPA Tier 4 Final and European Stage V regulations?

Yes. The emulator automatically detects the exact ECU profiles for both Tier 4 Interim and Tier 4 Final Scania engine families. It is heavily utilized by aggregate, aggregate processing, mining, and civil contracting fleets across the USA and Canada to eliminate expensive downtime in out-of-warranty machines operating in off-road settings.

 

Key Benefits

  • Plug & Play: No tuning, programming, or laptop needed
  • Full Power Restored: Removes all derate and limp mode conditions
  • Eliminates DEF & NOx Faults: No SCR / NH3 / tank / pump / sensor errors
  • Weather Resistant: Sealed unit for harsh off-road conditions
  • 2-Year Warranty: Backed by BlueRemoval’s worldwide support

Technical Details

  • Communication: CAN Bus – 250 kbps
  • Connection: 4-wire (24V+, GND, CAN-H, CAN-L)
  • Engine Families: DC9 / DC13 / DC16 (Tier 4i / Tier 4F)
  • Emulation: DEF Pump, Tank Sensor, NOx Sensors, NH3, SCR Control
  • Installation Time: Under 5 minutes

Installation Guide

Simply disconnect the factory DEF control module and connect the emulator using the included 4-pin plug. The emulator will take over SCR communication, clear all active fault codes, and disable derate automatically.

✔️ No wiring modifications or laptop tools required.
✔️ Reversible design: unplug any time to restore stock configuration.

Legal Notice

This product is intended strictly for off-road, export, and non-road equipment. It must not be used on registered or road-going vehicles. Please ensure compliance with local emissions laws before installation.

Why Choose BlueRemoval?

  • 🌍 Worldwide shipping via DHL Express
  • 🔧 Tested on Scania-powered machines worldwide
  • 📦 Supplied ready to install with simple plug diagram
  • 💬 Technical support available 7 days a week

 

Get your Scania DEF Delete Emulator today and restore full performance to your DC9, DC13, or DC16 engine.

Related products

Scroll to Top